Converting Your Homemade Soap Recipe Into a Shampoo (2024)

Natural Hair Care

By

David Fisher

David Fisher is a highly regarded professional soaper with over 15 years of experience, sharing his knowledge of the craft, science, and chemistry of saponification. He currently owns Bath Rabbit Soap Company and is the author of "The Complete Photo Guide to Soap Making."

Learn more about The Spruce Crafts'Editorial Process

Updated on 10/08/19

Converting Your Homemade Soap Recipe Into a Shampoo (2)

If you've been making your own cold process soap and using it in your shower, howabout using your soap as a shampoo?

Many people use their cold process soap as a shampoo bar as well. But hair is different than skin, so you need to do a few things differently in order to have the best results. Most soap makers recommend:

  1. Formulating your recipe differently—both in terms of the oils chosen, but in the additives and superfat percentage
  2. Using a vinegar or citric acid rinse
  3. Knowing that some people's hair just doesn't work well with real soap—and being okay with going back to a standard surfactant-based shampoo. There are so many variants, like the hardness of the water where you live and your particular hair type, that they just don't work for everyone.

Homemade Shampoo Recipes

First, for the best results on your hair, there are a few changes you can make to your regular soap recipe that will help your soap work better on hair. Castor oil makes great shampoo, as do the softer oils like avocado, canola, and almond.

Here are three recipes to get you started. Feel free to customize them or use similar oils that you may have on hand. (For example, you can easily substitute palm kernel for the coconut, or rice bran for the olive, or lard for the palm.)

Included are the percentages of each ingredient to make a 2 lb. batch of soap. They can be scaled up or down according to your needs.

Note: The superfat/lye discount is calculated at 6 percent for these recipes. Some people prefer a low (3 percent or so) superfat in their shampoo bars, others prefer a high (10 to 15 percent) superfat in their recipes. Give 6 percent a try and then adjust up or down depending on your preference. Be sure to always run your recipe through a lye calculator! These recipes will still all probably take at least 48 hours to harden in your soap mold.

Basic, Mild Shampoo Recipe

  • 25 percent coconut oil
  • 25 percent olive oil
  • 20 percent castor oil
  • 15 percent canola oil
  • 15 percent palm oil

To make a 2-lb batch:

  • 5.8 ounces coconut oil
  • 5.8 ounces olive oil
  • 4.6 ounces castor oil
  • 3.5 ounces canola oil
  • 3.5 ounces palm oil
  • 3.2 ounces sodium hydroxide
  • 6.4 ounces water
  • 3/4 tsp of salt (to make the soap get harder quicker)
  • 1 tsp of sugar (to boost the lather)
  • 1 ounce of fragrance or essential oil blend

Light Cleansing Recipe

  • 30 percent coconut oil
  • 25 percent olive oil
  • 25 percent castor oil
  • 10 percent palm oil
  • 10 percent canola oil

To make a 2-lb batch:

  • 6.9 ounces coconut oil
  • 5.8 ounces olive oil
  • 5.8 ounces castor oil
  • 2.3 ounces palm oil
  • 2.3 ounces canola coil
  • 3.2 ounces sodium hydroxide
  • 6.4 ounces water
  • 3/4 tsp of salt (to make the soap get harder quicker)
  • 1 tsp of sugar (to boost the lather)
  • 1 ounce of fragrance or essential oil blend

Luxury Shampoo Recipe

  • 25 percent coconut oil
  • 20 percent olive oil
  • 20 percent castor oil
  • 10 percent canola oil
  • 10 percent avocado oil
  • 10 percent palm oil
  • 5 percent jojoba

To make a 2-lb batch:

  • 5.8 ounces coconut oil
  • 4.6 ounces olive oil
  • 4.6 ounces castor oil
  • 2.3 ounces canola oil
  • 2.3 ounces avocado oil
  • 2.3 ounces palm oil
  • 1.2 ounces jojoba
  • 3.1 ounces sodium hydroxide
  • 6.2 ounces water
  • 3/4 tsp of salt (to make the soap get harder quicker)
  • 1 tsp of sugar (to boost the lather)
  • 1 ounce of fragrance or essential oil blend

To make these soaps, follow basic soap making instructions. The amount of water in these recipes are low so that they will harden quicker in the molds. The high percentage of soft oils in the recipes can make them take a while to harden in the mold.

You'll want to make sure to add the salt and the sugar to the lye water. The salt helps the soap to get harder quicker and the sugar helps boost the lathering ability of the soap.

Rinse

Because of the high pH of cold process soap, most people use a slightly acidic rinse on their hair after using a shampoo bar. The high pH raises the cuticle of the hair follicle, making it more prone to damage. The rinse helps lay it back down.

You can make the rinse out of either:

  • 1 cup vinegar (apple cider or white) to 2 cups water or
  • 1 tbsp. citric acid powder to 3 cups water

Give shampoo bars a try. Some people rave about them; some people like them, but prefer a traditional shampoo.

Converting Your Homemade Soap Recipe Into a Shampoo (2024)
Top Articles
Latest Posts
Article information

Author: Duane Harber

Last Updated:

Views: 6373

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.